Follow along to see how you can get the asymmetric hem look on a striped dress in a few simple steps – sewing skills are optional! Here’s what you’ll need:
- Striped Fitted Dress (Steps illustration dress from Topshop)
- Needle & Thread/Fabric Glue/Fabric Tape
Step 1: Lay the dress on a flat surface and cut off the hem section that covers the width of one white stripe and one black stripe all around the dress. We will use this in Step 3 to create the asymmetrical wrap effect.
Step 2: Based on the width of the dress, measure the center (pink line) that divides the dress into left and right sections. This center will be the guide for the cuts we will make. Point A is the length of your dress on the short side, so measure that accordingly. Point B falls on the center and is a straight line from A. On the left half of the dress, Point C sits closer to the edge than the pink center line. Point D is at the left edge and on the same level as Points A & B. On the front side of the dress, cut the dress from A-B, B-C and C-D. On the back of the dress, cut the dress all the way from D-A in a straight line.
Step 3: Take the hem you cut off in Step 1. Cut it at the left or right edge so it’s a straight line and not a loop. Place it diagonally from Point C to Point B and continue the diagonal line over the right section of the dress till the edge. Cut off any extras. You can sew the piece onto the dress, glue it or bond the two together with fabric tape. And you are done!
If your dress is not long enough for this, you can buy a similarly striped T-Shirt/Tank/Skirt. Then cut off the diagonal strip and triangular piece from that extra item and add it at the bottom of your dress. Then you have your own unique striped dress with an asymmetrical wrap effect. I love that this dress can be worn both casually during the day and little more dressier during the night with the addition of fa ew accessories.